246000_EnerPro 60V-Tr_v02.jpg
Two-pole SPD type 2+3 (class II+III) with gas discharge tubes (GDT) and suppressor diodes for operating currents up to 6 A.
  • SPD type 2 for DC power supplies
  • Two-step protective circuit with integrated low-pass filter
  • High performance surge protector
  • Mounting directly on mounting plate or on 35 mm DIN rail
  • EAC certification
IEC category Type 2 + 3 / class II + III
Nominal voltage DCUN 60 V=
Nominal voltage ACUN 43 V~
Max. continuous operating voltage DCUc 85 V=
Max. continuous operating voltage AC (50/60 Hz) Uc 60 V~
Max. operating currentIL 6 A
Leakage current at Uc DC ≤ 5 µA
DC resistanceR 27 mΩ
Series inductance, typ.L 20 µH
Protection level line-earth at 1 kV/μs and InUp ≤ 800 , typ. 650 V
Additional Information
Protection level line-line at 1 kV/µs and InUp ≤ 95/125 V
Short-circuit current extinguishing capacity line-line ≤ 1 A
Short-circuit current extinguishing capacity line-earth ≤ 0,75 A
Lightning impulse current (10/350 µs)Iimp 3 kA
Nominal impulse discharge current (10 x 8/20 µs)In 20 kA
Service life test current (500 x 10/700 µs)il 200 A
Critical discharge current (10/700 µs) 1000 A
Max. alternating discharge current (50 Hz/ 5x 0,5s)Iwn 50 A
Max. current 50 Hz/0.5 sIg 80 A
Operating temperature rangeTU -25 - +85 °C
Max. conductor cross section 2.5 mm² single-wire / 1.5 mm² flexible with sleeve
Housing size WxHxD 17.5 x 87 x 58 mm

Accessories

Related Products