EnerPro 48V/100A-Tr/Pk
Article Nr. : 382071
Surge voltage protector for equipment power supplies and installations up to 100 A and 48(60) V DC. A very low protection level allows the use as SPD type 3 (class III).
- With potential-free remote signalling contact (Pk)
- SPD type 2 for DC power supplies
- High performance surge protector
- Valve arrester SPD (leakage-current free)
- Function control indication via LED
| IEC category | Type 2 /class II |
| Nominal voltage DCUN | 48 V= |
| Nominal voltage ACUN | 34 V~ |
| Max. continuous operating voltage DCUc | 60 V= |
| Max. continuous operating voltage AC (50/60 Hz) Uc | 42 V~ |
| Nominal currentIL | 100 A |
| Protection level at 1 kV/µs (1, 2-PE)Up | ≤ 0,2 kV |
| Protection level at In (1, 2-PE)Up | ≤ 0.3 kV |
| Response timetA | < 25 ns |
| Nominal discharge current (8/20 µs)In | 15 kA |
Additional Information
| Max. impulse discharge current (8/20 µs)Imax | 30 kA |
| Max. allowed fuse or back-up fuse | 125 A gG |
| Operating temperature rangeTU | -40 - +80 °C |
| Max. conductor cross section | 50 mm² stranded/35 mm² flexible |
| Recommended conductor cross section | 25 mm² |
| Max. connection torque for terminals | 4,0 Nm |
| Enclosure material / colour | polycarbonate (halogen-free) UL 94-V0 / yellow |
| Degree of protection (IEC EN 60529) | IP 20 |
| Mounting on | 35 mm DIN rail (DIN EN 60715 ) |
| FM contact / contact type | break contact |
| Switching capacity FM | 250 V/2 A |
| Max. conductor cross section Pk | 1,5 mm² |
