DP 2x1-24V-SDSL-Tr
Article Nr. : 240024
Surge voltage arrester with a two-step circuit to protect two single wires in data and signal lines. The arrester is especially designed for 24 V SPS input lines. It is suited for high-frequency and very fast data transmission. The arrester is applicable at the LPZ transition point 0B-2 and higher. Alternatively, direct and indirect earthing is possible.
- High performance surge protector
- Lightning impulse current 5 kA (10/350 µs)
- Transfer rate 100 Mbit/s
- Nominal current max. 500 mA
- Mounting directly on DIN rail
- fG > 300 MHz
- EAC certification
| Nominal voltage DCUN | 24 V= |
| Nominal currentIL | 0,5 A |
| C2 nominal discharge current (8/20 µs) totalImax | 20 kA |
| C2 nominal discharge current (8/20 µs) per lineIn | 10 kA |
| Protection level 1p-2p;1p,2p-PE (1 kV/µs)Up | ≤ 0,6 kV |
| Signal tranismission rate | 100 Mbit/s |
| Max. operating frequency (-3 dB)fG | 300 MHz |
| Operating temperature rangeTU | - 25 - + 85 °C |
| Series resistance | 0 Ω |
| Series inductance, typ.L | 0 µH |
Additional Information
| Response timetA | ≤ 1 ns |
| Degree of protection (IEC EN 60529) | IP 20 |
| Max. conductor cross section | 2.5 mm² single-wire / 1.5 mm² flexible with sleeve |
| Max. connection torque for terminals | 1,5 Nm |
| Housing size WxHxD | 18 x 87(90) x 58 mm |
| Terminals | Screw-type terminal |
| Mounting on | 35 mm DIN rail (EN 60715) |