Download

/

Downloads

/

Datasheets

One-piece SPD for MCR applications


One-piece SPD with high discharge cappability for MCR applications

Terminal blocks with integrated surge protection can optimize the used space in a control cabinet and at the same time provide high level protection for terminal equipment and devices.

  • Protective circuit for 2 signal lines without reference to ground potential
  • Applicable at the boundaries LPZ 0B - 1 and higher
  • Test standard: IEC 61643-21 / EN 61643-21
  • Mounting on 35 mm DIN rail
  • 6.2 mm DIN rail module
  • Earthing via DIN rail or connector

One-piece SPD with high discharge cappability and low protection level for MCR applications

Terminal blocks with integrated surge protection can optimize the used space in a control cabinet and at the same time provide high level protection for terminal equipment and devices.

  • Protective circuit for 2 signal lines with common ground
  • Applicable at the boundaries LPZ 0B - 2 and higher
  • Test standard: IEC 61643-21 / EN 61643-21
  • Mounting on 35 mm DIN rail
  • 6.2 mm DIN rail module
  • Earthing via DIN rail or connector

 

 

One-piece SPD with low protection level for MCR applications

Terminal blocks with integrated surge protection can optimize the used space in a control cabinet and at the same time provide high level protection for terminal equipment and devices.

  • Protective circuit for 2 signal lines without reference to ground potential
  • Applicable at the boundaries LPZ 1 - 2 and higher
  • Test standard: IEC 61643-21 / EN 61643-21
  • Mounting on 35 mm DIN rail
  • 6.2 mm DIN rail module
  • Earthing via DIN rail or connector
Drucken | Print |Bookmark